JL Soft Top Removal


How to operate your Wranler JL Soft Top 

How to operate your Wrangler JL Soft Top

How To Operate Your Wrangler JL Soft Top

How do I put the soft top down?

Step 1: Fold the sun visors down and release the header latches above the windshield frame by pulling down on the handles. Step 2: Push up on the soft top to allow it to fold back into the Sunrider Position. Step 3: Remove the plastic retainers from the tailgate retainers then grab the bottom tailgate bar on the rear window and rotate up and out to to remove from body retainers. Step 4: Slide the rear window off by sliding left towards the driver side of the Jeep. Stow window away safely. Step 5: Pop out the quarter windows by grasping the plastic support at the rear of the vehicle and pulling outward until it pops out of retainers and pull out the window retainers from the body starting from the rear towards the door rail. Step 6: Slide the quarter windows off rearward to remove from the Wrangler. Stow windows safely away. Step 7: Pull down on the Sunrider latch which is located on the back attached to the Soft Top on the driver's side. The top will freely slide down in the guide tracks to a stowed position. Step 8: Slide the lever to locked position on the right and left sides of the stop to secure the top.

How do I put the soft top back up?

Step 1: Slide the lever to the unlock position on each side of the soft top. Step 2: At the rear of the Jeep, grab the soft top material and push it upward onto the top of the Wrangler to allow it to slide along the guide track and lock. Step 3: From the rear of the Jeep, guide the quarter windows female extrusions onto the cover male extrusions and slide forward. Step 4: Guide the rear window plastic support into the retainers on the body and push them into place. Step 5: Insert all of the quarter window retainers back into the body retainers from door rail to the rear of the Jeep. Step 6: Guide the rear window male extrusion into the cover female extrusion from the left driver side of the Jeep and slide to the right. Step 7: Install the tailgate bar into the retainers and push all retainers on the sides of the rear window back into the body retainers. Step 8: Secure the header latches by pushing down the latch making sure the hook grabs the header above the windshield frame and push all the way up until it locks. If you are having any trouble getting your Wrangler JL soft top on or off, please bring your Jeep by our dealership or give us a call!
Saved Vehicles


You don't have any saved vehicles!

Look for this link on your favorites:


Once you've saved some vehicles, you can view them here at any time.

Contact Us


Call Now

5202 Jefferson Davis Hwy. • Fredericksburg, VA 22408

Get Directions

Today's Hours:

Open Today! Sales: 9am-9pm

Open Today! Service: 7:30am-9pm

Safford Chrysler Dodge Jeep Ram & FIAT of Fredericksburg 38.2556722, -77.4953806.